AvMap ekp iii c User Manual
NOTE
C-CARD should be inserted or removed when the EKP-III is powered Off. Be sure to keep the slot free
of moisture; it is NOT waterproof.
While holding the EKP-III facing towards you, hold the C-CARD with the gold contacts
toward the receiver and “C-MAP” facing up. Insert the C-CARD into one of the slots at the
top of the receiver. Push the C-CARD all the way in. When it will go in no further, press the
edge of the C-CARD down gently until it rests in place behind the plastic catch.
toward the receiver and “C-MAP” facing up. Insert the C-CARD into one of the slots at the
top of the receiver. Push the C-CARD all the way in. When it will go in no further, press the
edge of the C-CARD down gently until it rests in place behind the plastic catch.
Fig. 2.6.1a - Inserting C-CARD (II)
2.6.2 REMOVING C-CARD
To remove the C-CARD, turn your EKP-III off and push the C-CARD in and up gently to
free it from the plastic catch, then slide it out. The C-CARD will pop out easily.
free it from the plastic catch, then slide it out. The C-CARD will pop out easily.
Fig. 2.6.2 - Removing C-CARD
NOTE
Data cartridges are available from your dealer or directly from C-MAP (see address on the rear cover).
24
EKP III USER MANUAL