AvMap ekp iii c User Manual

(Note: The white approach bearings will disappear once the screen redraws itself).

Flight Plan mode allows the pilot to plan and activate up to ten flight plans with up to 100 indi-

vidual legs each. Now the EKP III allows the pilot to pre-program an approach at the desti-

nation end of the flight plan and to change the approach as desired.

Once an airport is present as a final waypoint in the flight plan, press ‘MENU’ and

“SELECT APPROACH” + ‘ENTER’ and the available approaches for the destination air-

port will be displayed. Highlight the approach desired, press ‘ENTER’ and the waypoints

associated for that approach will show in the flight plan list. Press ‘ESC’ + ‘ESC’ and the flight

plan will appear on the moving map.

To change the desired approach for the airport, if one is selected

This will substitude the previous approach including the waypoints on the moving map for the

new approach and add the new waypoints to your flight plan and the moving map.

68

EKP III USER MANUAL