American Audio flex 100mp3 User Manual
©
American Audio
®
- www.AmericanAudio.us - Flex 100MP3 Instruction Manual Page 21
Figure 24
Figure 23
BASIC OPERATIONS (CONT.)
12. BANK BUTTONS (13):
These buttons are used to store your cue points. Only a cue point can be stored
into each of these four banks. The Bank ButtonS instantly recall your cue
points.
into each of these four banks. The Bank ButtonS instantly recall your cue
points.
13. CHANGING THE TImE DISPLAY (44)/TImE BAR (43):
The time may be displayed in three different modes; Elapsed, Remain, and Total
Remain. During normal playback, pressing the TIME BUTTON (10), will change
the time display information (43, 44, & 46) in the LCD (28). The following is a break
down of the time settings and their definitions:
1) TOTAL REMAIN (46) - This details the time in the lcd as the current CDs’
total remaining time.
Remain. During normal playback, pressing the TIME BUTTON (10), will change
the time display information (43, 44, & 46) in the LCD (28). The following is a break
down of the time settings and their definitions:
1) TOTAL REMAIN (46) - This details the time in the lcd as the current CDs’
total remaining time.
2) REMAIN (46) - This details the time in the lcd as the current track's remain-
ing running time.
3) ELAPSED - This details the time in the lcd as the current track's elapsed
running time.
ing running time.
3) ELAPSED - This details the time in the lcd as the current track's elapsed
running time.
Note: The LCD will not display "ELAPSED", when the Elapsed running time
is shown.
TIME BAR INDICATOR - The time bar in the LCD (28) visually details the time defined in the TIME METER (43).
This bar is also dependent on the selected time function REMAIN, TOTAL REMAIN, or ELAPSED.
This bar is also dependent on the selected time function REMAIN, TOTAL REMAIN, or ELAPSED.
This bar will
begin to flash when 15 seconds of a track remain and will begin to rapidly flash when three seconds
of a track remain. The flashing bar is a great visual reminder a track is about to end. The flashing bar
will function regardless of which time mode the unit is in.
of a track remain. The flashing bar is a great visual reminder a track is about to end. The flashing bar
will function regardless of which time mode the unit is in.
EDITING A LOOP USING THE JOG WHEEL:
To edit a loop out point using the jog Wheel (14) press and hold the reloop
Button (22). While the loop is active you will see the current out point time in
the character diSplay (45), use the jog Wheel (14) to adjust your new out
point. Rotating the wheel clockwise will advance your outpoint making your loop
longer. Rotating the wheel counter-clockwise will make your loop shorter.
Button (22). While the loop is active you will see the current out point time in
the character diSplay (45), use the jog Wheel (14) to adjust your new out
point. Rotating the wheel clockwise will advance your outpoint making your loop
longer. Rotating the wheel counter-clockwise will make your loop shorter.