DIESEL dz1067 User Guide

Page of 18
Chronograph Stopwatch OS10 (no date - OS30)
(1 crown/2 pushers)
TIME SETTING
1.  Pull crown out to position 3.
2.  Turn crown to set the desired time.
3.  Return crown to position 1.
DATE SETTING
1.  Pull crown out to position 2.
2.  Turn crown counter-clockwise until the correct date is shown in the date window.
3.  Return crown to position 1.
CHRONOGRAPH OPERATION
1.  Press A to start/stop the chronograph.
2.  Press B for reset.
ADJUSTING THE CHRONOGRAPH
1.  Pull crown to position 3.
2.  Press A to reset the second hand to “0.”
3.  Press B to reset the chronograph minute and hour hands.
4.  Reset the watch to the current time and return crown to position 1.
(A)
(1) (2) (3)
(B)
MINUTE HAND
HOUR HAND
SECOND HAND
Chronograph with Date OS20, FS00, FS20
(1crown/2pushers)
TIME SETTING
1.  Pull crown out to position 3. Chronograph second hand will return to zero position. Do not return the crown to its normal
position while the hands are returning to zero, or else the position the hands are at when this is done will be recognized as
the new zero position.
2.  Turn to set hour, minute and 24 hour hands.
3.  Return crown to position 1.
DATE SETTING
1.  Pull crown out to position 2.
2.  Turn clockwise to set the date.
3.  Return crown to position 1.
CHRONOGRAPH OPERATION
1.  Push A to start/stop the chronograph.
2.  Push B to reset the chronograph.
CHRONOGRAPH ZERO RESET
1.  Pull crown out to position 3.
2.  Press A to set the chronograph second hand to 12:00 (zero) position. Each press advances the chronograph second hand
one mark. If A is held down for over 2 seconds, the chronograph second hand advances continuously.
3.  Return crown to position 1.
(B)
(A)
(1) (2) (3)
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
24 HOUR HAND
DATE
SECOND HAND
(B)
(A)
(1) (2) (3)
Chronograph JS15, JS25, JS26
TIME AND DATE SETTING
1.  Pull crown out to position 2.
2.  Rotate crown clockwise until the previous day’s date is shown in the date window.
3.  Pull crown out to position 3.
4.  Rotate crown clockwise until the correct date is shown in the date window.
5.  Continue to rotate crown to set correct am/pm time.
  NOTE: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to 
check that the 24-hour hand is set properly.
6.  Return crown to position 1.
  NOTE: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move.
  NOTE: Do not set the date between 9:00 p.m. and 1:00 a.m. to ensure accuracy.
CHRONOGRAPH
1.  Press A to start/stop the chronograph.
2.  Press B to reset to zero.
CHRONOGRAPH ZERO RESET
1.  If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3.
2.  Press A to move hands clockwise; press B to move hands counter-clockwise. Each press of A or B will move the
chronograph hands by one increment/decrement. Or press and hold A or B for fast increment/decrement.
3.  When both hands are in the zero position, reset time and return crown to position 1.
  NOTE: Chronograph minute hand will synchronize with chronograph second hand during chronograph zero reset.
(A)
(1) (2) (3)
(B)
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
24-HOUR HAND
(A)
(B)
(1) (2) (3)
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
24-HOUR HAND