Rotel rdv-1080 User Guide

Page of 28
27
English
Troubleshooting
If you are experiencing difficulties, consult the
following list for possible solutions:
No Power: make sure the unit is plugged
in properly.
Remote does not work: check the bat-
tery installation, install new batteries, aim
remote at unit.
TV/VIDEO-CANCEL, CURSOR, or NU-
MERIC buttons do not work: 
TV-DVD
switch must be set to TV to operate the TV
functions and DVD to operate the RDV-1080.
No picture: check the video cable connec-
tion and input setting on TV, turn off Progres-
sive scan feature.
Picture is noisy: do not connect unit directly
to VCR (copyguard feature may disrupt video
signal), turn off Progressive scan feature or set
its mode to VIDEO.
Picture is garbled: Change Screen Saver
mode to something other than Mode 1.
Picture does not fill screen: Set TV Monitor
type correctly.
No sound: check the audio cable connec-
tion and input settings preamplifier.
Garbled sound: Clean the disc surface.
Unit does not operate properly: To re-
set the microprocessor, turn off the power,
unplug the power cord, and reconnect the
power cord. Following a sudden temperature
change (such as bringing unit or discs inside
from extreme cold), allow several hours for
possible condensation to clear.
Specifications
General
Readable discs:
DVD Audio, DVD Video, Audio CD,
Video CD, SVCD
Video format:
For NTSC discs, the scanning mode can be selected
between Interlaced scan and Progressive scan. For
PAL discs, only the interlaced scan mode is avail-
able.
Other
Power requirements:
AC 110-240 V , 50/60 Hz
Power consumption:
20 W (POWER ON)
1.5 W (STANDBY mode)
Weight:
5.1 kg (11.2 lbs)
Dimensions (W x H x D):
430 mm x 121 mm x 340 mm
16-
15/16
 inch x 4-
13/16
 inch x 13-
7/16
 inch
Video output
COMPONENT (pin jack):
Y Output: 1.0 Vp-p (75 ohm)
PB/PR Output: 0.7 Vp-p (75 ohm)
VIDEO OUT (pin jack):
1.0 Vp-p (75 ohm)
S-VIDEO OUT (S jack):
Y Output: 1.0 Vp-p (75 ohm)
C Output (NTSC): 286 mVp-p (ohm)
C Output (PAL): 300 mVp-p (75 ohm)
Horizontal resolution:
500 Lines
Signal to noise ratio:
65 dB
Audio output
Analog Out (pin jack):
2.0 Vrms (10 k ohm)
Digital Out:
Optical: –21dBm to –15dBm (Peak)
Coaxial: 0.5 Vp-p (75 ohm)
Audio characteristics
Frequency response:
CD (at 44.1 kHz): 2 Hz to 20 kHz
DVD (at 48 kHz): 2 Hz to 22 kHz
DVD (at 96/88.2 kHz): 2 Hz to 44 kHz
DVD (at 192/176.4 kHz) : 2 Hz to 88 kHz
Dynamic range:
16 bit: more than 100 dB
20 bit: more than 110 dB
24 bit: more than 110 dB
Wow and flutter:
Unmeasurable (less than ± 0.002%)
Total harmonic distortion:
16 bit: less than 0.0018%
20/24 bit: less than 0.0012%
All specifications are accurate at the time of
printing.
Rotel reserves the right to make improvements
without notice.
Rotel and the Rotel HiFi logo are registered
trademarks of The Rotel Co, Ltd., Tokyo, Japan.
DTS is a registered trademark of Digital Theater
Systems.
Manufactured under license from Dolby Laborato-
ries Licensing Corporation. “Dolby”, “Pro Logic”,
“Dolby Surround”, “Dolby Digital”, and the
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation. Confidential
unpublished works © 1992 – 1997 Dolby Labora-
tories, Inc. All rights reserved.