BTC 2001brf Installation Instruction

Page of 8
 
2001BRF/URF QIG 英 
3100505090 v1.2 
Wireless Keyboard & Mouse Kit
 
Quick Installation Guide 
Hardware Installation 
         
 
Front View of Receiver Plug
   
Back View of Receiver Plug
ID Button
1.5V 2pcs
 
1.  Connect the receiver to your PC by plugging in 
the receiver’s USB plug into your PC. 
2.  Take the keyboard and make sure the batteries 
on the back are installed correctly. (Follow the 
polarity signs in the battery compartment.) 
3.  Take the mouse and make sure the batteries on 
the back are installed correctly. (Follow the 
polarity signs in the battery compartment.) 
ID Button
             
 
ID Setting 
ID Button
 
ID Button
   
This ID-recognition function helps to protect against 
interference from other RF keyboards in the same 
environment. Remember to set the ID when you 
replace the batteries or your key board kits do not 
work properly. 
The word CONNECT labels the ID button on each 
unit. 
The LED under ID button of receiver shows 
connecting condition. 
1.  Your PC must be on to change the ID setting. 
2.  Press ID button on the side of the receiver once. 
3.  Press ID button on the bottom of the mouse 
once. 
4.  Press ID button on the bottom of the keyboard 
once. 
ID Button
1.5V 2pcs
 
Important:
 
1. Use the mouse only on a clean, flat, non-slippery surface in order to ensure smooth and 
accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one. 
Software Installation 
Keyboard Driver Installation 
In order to take advantage of the special button functionality of the keyboard you will have
to install the keyboard driver which is located on the driver disk included in the box. 
1. Insert the disk labeled "KeyMaestro Input Device Driver" into your disk drive. 
2. Open File Explorer to find "SetupKey.exe" from the disk. Double-click the "SetupKey.exe". 
3. Then follow the screen instruction to install the driver. The default-installed path is set to 
c:\Program Files\KMaestro. You have the option to change the install path during setup. 
4. When all setup procedures are finished, the operating system does not need to restart. The 
driver is loaded when you see the driver icon show on the taskbar.  
 
2001URF 
2001BRF
ID Button of Receiver
ID Button of 
Mouse 
ID Button of Keyboard