MPIO fg200 User Guide

Connecting to a PC

Installing USB Driver manually

Connecting to a PC with a USB Cable

Connect FG200 to the PC with the USB cable as shown image.

●

If the USB cable is disconnected from the PC during the initial USB driver installation or in middle of a command,

it may malfunction.

The USB Driver will be installed with a message indicting “Looking for a New Device” The installation screen

may not appear. Check the Device Manager to conﬁrm the installation.

Connect with a USB Cable

Note

●

If the system operating under Windows 98/98SE doesn’t connect with FG200 automatically, install the

USB Driver manually by referring to “Installing USB Driver manually (Page 19, 20)”.

●

Windows 98/ME:

[Control Panel] → [Systems] → [Device Manager] →

[Hard Disk Controller]→ MPIO FG200 USB Device

●

Windows 2000/XP:

[Control Panel] → [Systems] →[Hardware]→[Device Manager]

→[Disk Drive]→ MPIO FG200 USB Device

Confirming USB Installation

For Windows 98/98SE users, refer to the following procedure when the computer and

the device does not connect.

Connect FG200 with a computer with the USB

cable. When “Add New Hardware Wizard” window

appears on the screen as shown in right, click the

[Next] button.



Check “Search for the driver for your device”,

click the

[Next] button.



Click

Connection