MPIO fl400 User Guide
MO CH 1
FM002.MP3 00:00
MO CH 1
FM002.MP3 01:20
MO CH 1
FM002.MP3 02:30
107.7
MHz
107.7
MHz
MO CH 3
◄
89.9
MH
Z
►
CH01 : 105.50
CH02 : 99.9
MO CH 3
89.9
MHz
Channel
SAVING
33
■ Radio Recording
32
■ Listening to the Radio
While listening to the radio, hold down the
MENU button.
Press the / button after selecting the Mode with the
button.
Radio recording starts after selecting
Recorder with the / button and pressing the
button.
■ During radio recording, if you press the
button, recording is paused; press the
button again
to continue recording.
`
If you press the
MENU button, you end after saving the recording.
Note
● The files will be stored in order of FM001, FM002, etc. And it will be stored in the RECORD folder as
a MP3 file.
● When storing the radio recording files, recording wills stop automatically if there aren’t sufficient
memory space.
● The radio recording memory is limited to 64MB for each. In case the volume of any voice recording is
more than 64MB, the file being recorded is automatically saved and it continues recording by creating
a new file. To operate this, it needs around 2 seconds and during that period(2seconds), voice recording
stops.
█
Changing a saved frequency
You can change an already saved channel to another frequency.
■ At a new frequency, if you press the
■ At a new frequency, if you press the
MENU button, the save channel
screen appears. Press the
button after selecting the saved channel
number.
■ When saving a frequency, if you have an already saved frequency at a
channel number, the previous frequency is deleted and the new one is
saved.
█
Listening to a Saved Frequency (Channel mode)
If you press the
button, you can change receive mode
Scan ↔
Channel.
Press the
Press the
button to select the
Channel mode.
Whenever you press the / button, you can go between the saved
frequencies (channels). You can listen to the selected channel.
frequencies (channels). You can listen to the selected channel.
Note
●
If there aren’t any saved frequencies (channels), NO CHANNEL! message will
appear on the screen and the device will remain in SCAN mode.
33
32
Usage
FL400_Eng_060216.indd 32-33
2006-02-16 ソタネト 2:57:51