Conairphone cid500 Owner's Manual

Page of 9
4. If [SLEEP LOUDNESS] is pressed, the sound
volume within the selected playing time will be
decrease by 6dB. Press [SLEEP LOUDNESS]
again to resume normal sound volume level. You
can also press [Volume 
] or [Volume 
] to select a
suitable volume level.
CUSTOMER INFORMATION
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom
 of this equipment is a label that contains, among
other information, a product identifier of
US:DJTMT10BCID500
. If requested, this number must
be provided to the telephone company.
The applicable jacks ( i.e. RJ11C ) for this equipment
are provided in the packaging with each piece of
approved equipment. The jacks are certified by
Universal Service Order Codes (USOC).
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug are provided with this product. They are
designed to be connected to a compatible modular jack
that is also compliant. See installation instructions for
details.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed
five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total
RENs, contact the local telephone company.
29
30
If this equipment CID500
 causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service may
be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide advance
notice in order for you to make necessary modifications
to maintain uninterrupted service.
If you experience trouble with this equipment,
disconnect it from the network until the problem has
been corrected or until you are sure that the equipment
is not malfunctioning.
Please follow instructions for repairing if any (e.g.
battery replacement section); otherwise do not alter
or repair any parts of device except specified.
Connection to party line service is subject to state
tariffs. Contact the state public utility commission, public
service commission or corporation commission for
information.
This equipment is hearing aid compatible.
NOTICE:
1. If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this ( equipment ID if any
 ) does not
disable your alarm equipment. If you have questions
about what will disable alarm equipment, consult
your telephone company or a qualified installer.
2. According to telephone company reports, AC
electrical surges, typically resulting from lightning
strikes, are very destructive to telephone equipment
connected to AC power sources. To minimize
damage from these types of surges, a surge arrestor
is recommended.
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. Some
cordless telephones operate at frequencies that may
cause interference to nearby TV’s and VCR’s; to
minimize or prevent such interference, the base of the
cordless telephone should not be placed near or on
top of a TV or VCR; and, if interference is experienced,
moving the cordless telephone farther away from the
TV or VCR will often reduce or eliminate the
interference. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV
technician for help.
In order to ensure compliance with the Class B FCC
Limits, the telephone line cord / FM radio antenna /
headphone or earphone cord must be installed at least
2 inches away from the enclosure of this unit.
ADDITIONAL INFORMATION
A. When your CONAIRPHONE
TM
 is not in use make
sure the handset is engaged into the base unit.
B. Avoid rough handling, areas with excessive moisture
heavy dust or extreme temperature.
C. To clean, use mild detergent and slightly damp cloth,
never use strong solvents or abrasives.
D. Connecting this telephone to a coin operated
telephone or a party line is prohibited by law.
E. If it is determined that your telephone is
malfunctioning, the FCC requires that it be
disconnected from the modular outlet until the
problem has been corrected.
SERVICE
According to FCC regulations, this equipment, which
has been certified and registered by the FCC, may
only be repaired by authorized persons. If repairs or
adjustments are made by an unauthorized person, the
FCC certification may be voided. Should you encounter
any problems, please call the Conairphone
TM
 toll-free
Customer Hotline for assistance:
1-800-366-0937, Monday - Friday
between the hours of 8:30 am - 9:00 pm and
Saturday 8:30 am - 12:30 pm (EST).
You can also visit our website at
www.conairphone.com
FOR IN-WARRANTY SERVICE:
Package your complete unit (including all adapters,
line cords, and other accessories) and ship the unit
postage prepaid* and insured (for your protection) to:
CONAIRPHONE
TM
DEPT.: In Warranty Repair
7475 North Glen Harbor Blvd., Glendale, AZ 85307
Be sure to include your return address, proof of
purchase, a daytime phone number, $9.50 for postage
and handling
*
, and a brief explanation of your
difficulties.
31
32