RCA cc180 User Guide

The optional 

 

 DC car cord allows you to power

your 
truck, or RV. I

from the cigarette lighter socket of a car,

converts

 to a 6-volt output.

Consult 

 installation and operating instructions enclosed

with the 

 for complete operating instructions.

 to power the camcorder, your vehicle’s

Cautions: The DCC07 is designed to be used only with
vehicles having negative ground electrical systems.

Use only RCA car cord adapter DCC07 or car cord

adapter/charger 

 with this camcorder. Use of any

other car cord adapter may damage the camcorder and void
your warranty.

2 .

3 .

4 .

 .

If the batte

is attached to the camcorder, remove it.

Make sure t e camcorder’s power is turned off. Slide the
POWER 

SW

 tch to turn off the camcorder. The POWER

indicator wi I turn off.

Attach the p wer connector as shown above.

Take the ve icle’s cigarette lighter out of the socket.

Start the ve icle’s engine.

prevent blowing the fuse in the car cord’s plug,

be sure to 

rt the vehicle’s engine before inserting the plug

into the cig 

 lighter socket. If it becomes necessary to

replace the  ar cord’s fuse, be sure to use a replacement fuse
with the exact current rating (amps).

6 .

7 .

Insert the car cord’s cigarette lighter plug into the vehicle’s
cigarette lighter’s socket. The POWER indicator on the car
cord adapter should light.

Slide the camcorder’s POWER switch to turn on the
camcorder. The  POWER  indicator will light.