RCA cc800 User Guide
Using the Battery to Power Your Camcorder
To AC Wall Outlet 100440
Adapter/Charger
Indicator
END
Indicator’
Battery Release Switch
POWER
Indicator
Indicator
Side A
END
Indicator’
Battery Release Switch
A
Switch
and Indicator
Charging Batteries
If the power connector is attached to the
DC
OUT jack on the adapter/charger,
remove its plug.
1. Plug adapter/charger into nearest AC
outlet
The
POWER
indicator lights.
2.
3.
I
Align reference mark on battery with
mark on adapter/charger and press
mark on adapter/charger and press
battery
pack-in until it locks.
If the battery is properly connected, the
indicator on that side of the
adapter/charger will flash.
Notes: You
may charge two batteries at
the same time. Whichever battery
y o u
attach first will charge first. The
3. When discharging is completed, the
indicator will light for the battery that
is
REFRESH
indicator will turn off, and
waiting to be charged.
the
CHARGE
indicator will flash while
If you try to charge a battery that has not
the battery charges.
been charged for a long period of
time, it
may take a few minutes for the
indicator to flash.
Use
REFRESH
on Side
A
The battery will provide increased
operation time if you “refresh)) it after
five charges. The
operation time if you “refresh)) it after
five charges. The
REFRESH
feature
“refreshes’? the battery by completely
discharging it.
discharging it.
1. Attach battery to side
A
of the
adapter/charger.
2. Press
REFRESH. The REFRESH
indicator will light and the battery will
begin discharging.
begin discharging.
Note:
The battery you
to side A will
always be refreshed first. Then the battery
attached to side
attached to side
will be charged before
the battery in side A.
4. After the battery is charged, the
END
indicator will light.
4. After one battery is charged, its
END
5. Press the battery release
switch
indicator will light. The other battery’s
removing the battery from the
CHARGE
indicator will flash while it
adapter/charger.
is being charged.
(continued on next page)
18