RCA cc800 User Guide

 

 

1. A. Camcorder connected directly to

TV: Turn on the TV and tune it to

the video in ut channel.

B. Camcorder connected to VCR that

is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) 

 the TV as you

normally 

 to see the signal

coming from the VCR.

2. Place the 

 switch in VCR to

turn on the camcorder. The  POWER
indicator will light.

3. 

Press PLAY.

l  

If noise bars appear on the screen,

press 

 -or +.

l  

During playback, use the playback

features on 

page 45.

4. 

To copy what the camcorder is playing,

5 .

Press STOP when you are finished.

place a blank cassette in the VCR, and
press the VCR’s RECORD button.

Note: Press 

to start camcorder

playback when copying tapes to improve
picture reproduction. Make sure the
memory-stop feature is turned off (press

or the camcorder

will enter play pause when the counter

reaches M 

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to

2 .

the video in

P

ut channel.

B. Camcorder connected to VCR that

is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.

Place the POWER switch
in CAMERA.

Note: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.

Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.

Note: During record pause, you can see the camcorder’s displays on the TV screen. Repeatedly
press 

47