LG LSES302ST User Guide

20

When using convection bake and roast, the 

Convection Auto Conversion feature will automatically 

convert entered regular baking temperatures to 

convection baking temperatures.

This feature is activated so that the display will show 

the actual converted (reduced) temperature. For 

example, if you enter a regular recipe temperature of 

350°F and press the START function, the display will 

show the converted temperature of 325°F.

  Touch and hold the  

 pad for 3 

seconds. “AUTO” will appear in 

the display.

  Touch the # 1 pad to ENABLE or 

touch the # 2 pad to DISABLE.

  Touch the START pad to accept 

the change.

You may find that your new oven cooks differently 

than the one it replaced. Use your new oven for a few 

weeks to become more familiar with it. If you still think 

your new oven is too hot or too cold, you can adjust 

the thermostat yourself.

Do not use thermometers,such as those found in 

grocery stores, to check the temperature setting of 

your oven. These thermometers may vary 20–40 

degrees.
NOTE: 

 

This adjustment will not affect the broiling or the Self 

Clean temperatures. The adjustment will be retained 

in memory after a power failure. 

The oven temperature can be increased (+) or 

decreased (-) as much as 35°F or 19°C.
NOTE: 

 

Once the temperature is increased or decreased, the 

display will show the adjusted temperature until it is 

readjusted.
NOTE: 

 

The thermostat adjustment for Bake will also affect 

Convection Bake or Convection Roast.

  Touch and hold the WARM/PROOF 

pad for 3 seconds. “AUTO” will 

appear in the display.

  Touch the WARM/PROOF pad 1 

time and “Adj" will be displayed.

  Using the number pad enter the 

temperature correction you wish to 

adjust. 

For example, to adjust the oven 

temperature 15 degrees, touch 1 and 5.

  Touch WARM/PROOF once to 

increase (+) or twice to decrease 

(-) the temperature.

  Touch the START pad to accept 

the change.

O P E R AT I N G   I N S T RU C T I O N S

Your new touch pad control has additional features that you may choose to use. The following pages

describe these features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day.

They remain in the control’s memory until the steps are repeated.

When the display shows your choice, touch the START pad. The special features will remain in memory after a 

power failure.

or