Intellinet 500500 User Manual

Access Point’s connection ports are located on the back panel. Below is the 

description of each connection port. 

 

 

 

1  Antenna Connector 

This round connection is standard Reverse SMA connector where any 

antennas with Reverse SMA connector can connect to the Access Point. 

 

2  DC Adapter Port 

Insert the power jack of the power adapter into this port. 

 

3  LAN Port 

The Access Point’s LAN port is where you connect to your LAN’s 

network devices.   

 

4  Reset 

The Reset button allows you to do one of two things. 

 

1)  If problems occur with your Access Point, press the reset button 

with a pencil tip (for less than 5 seconds) and the Access Point will 

re-boot itself, keeping your original configurations. 

2)  If problems persist or you experience extreme problems or you 

forgot your password, press the reset button for longer than 5 

seconds and the Access Point will reset itself to the factory default