Intellinet 500500 User Manual

Chapter 3    Wireless LAN Access 

Point Configuration

 

This Access Point provides web-based configuration tool allowing you to 

configure from wired or wireless stations. Follow the instructions below to 

get started configuration. 

 

1.  Make sure your wired station is in the same subnet with the Access 

Point.  

The default IP Address and Sub Mask of the Access Point is: 

Configure your PC to be in the same subnet with the Access Point.   
1a) Windows 95/98/Me 

1. Click 

the 

Start button and select Settings, then click Control Panel. The Control 

Panel window will appear. 

2. Double-click 

Network icon. The Network window will appear. 

3.  Check your list of Network Components. If TCP/IP is not installed, click the Add 

button to install it now. If TCP/IP is installed, go to step 6. 

4. In 

the 

Network Component Type dialog box, select Protocol and click Add 

button. 

5. In 

the 

Select Network Protocol dialog box, select Microsoft and TCP/IP and then 

click the OK button to start installing the TCP/IP protocol. You may need your 

Windows CD to complete the installation. 

6.  After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from 

the list of     Network Components and then click the Properties button. 

7.  Check each of the tabs and verify the following settings: 

  Bindings: Check Client for Microsoft Networks and File and printer sharing