Intellinet 501903 User Manual

Wireless LAN Access Point Configuration 

 

10

 

 

 

4.  You can start configuring the Access Point. 

 

1.  Make sure your wireless station is in the same subnet with the Access Point. 

Please refer to the step 1 above for configuring the IP Address and Sub Mask of 

the wireless station. 

 

2.  Connect to the Access Point. 

The Access Point’s default ESSID is “default” and the WEP Encryption 

function is disabled. Make sure your wireless station is using the same ESSID 

as the Access Point and associate your wireless station to the Access Point. 

3.  Enter 192.168.2.1 from Web Browser to get into the Access Point’s 

configuration tool. 

4.  Enter the user name and password and then press OK button and you are 

available to configure the Access Point now.