Intellinet 519021 User Guide
Modularized 24+2G Switch
35
2-5-12. TFTP Update Firmware
The following menu options provide some system control functions to
allow a user to update firmware and remote boot switch system:
1. Install TFTP Turbo98 and execution.
2. Copy firmware update version bin to TFTP Turbo98 directory.
3. In web management select administrator—TFTP update firmware.
4. Download new bin file then in web management press <update
allow a user to update firmware and remote boot switch system:
1. Install TFTP Turbo98 and execution.
2. Copy firmware update version bin to TFTP Turbo98 directory.
3. In web management select administrator—TFTP update firmware.
4. Download new bin file then in web management press <update
firmware>.
5. After update finished, press <reboot> to restart switch.
Note: the address and file name in the above screen shot are just example
Modularized 24+2G Switch
36
2-5-13. Configuration Backup
2-5-13-1. TFTP Rsetore Configuration
Use this page to set TFTP server address. You can restore EEPROM
value from here, but you must put back image in TFTP server, Switch will
download back flash image.
Use this page to set TFTP server address. You can restore EEPROM
value from here, but you must put back image in TFTP server, Switch will
download back flash image.
Note: the address and file name in the above screen shot are just example
2-5-13-2. TFTP Backup Configuration
Use this page to set TFTP server ip address. You can save current
EEPROM value from here, then go to the TFTP restore configuration
page to restore the EEPROM value.
Note: the address and file name in the above screen shot are just example