Printronix SL4M User Manual

Page of 272
Memory
213
Memory
Optional Expanded Memory Cartridge
CAUTION
You must power off the printer before you install or remove the EMC, or 
you may damage the EMC and the printer. If you remove the EMC after 
powering on the printer with the EMC installed, the fault message 
"MEMORY REMOVED Check EMC" will display. You cannot clear this 
message by reinserting the EMC. You must cycle power.
The expanded memory cartridge (EMC) is a user installable 32MB memory 
storage cartridge that provides additional flash memory for downloading 
forms, logos, and fonts. The EMC can be ordered as a factory option kit or as 
a field upgrade kit that allows users to increase the printer flash memory 
capacity. The EMC can also come as a preloaded factory kit with one Asian 
TrueType font (see “DBCS Character Sets and Fonts” on page 218) or with 
the PJL option.
Media Cutter Option
The media cutter is designed to cut tags and label liner. Avoid cutting through 
the adhesive backed portion of any media.
Flash Memory (standard)
8MB fixed on Controller PCBA
DRAM (standard)
32MB fixed on Controller PCBA
Typical Life
More than 1,000,000 cuts
Warranty
500,000 cuts
Environment
Same specifications as printer
Cutting Method
Single-edged blade, up/down slice motion
Media Thickness Range
0.0025 to 0.010 in. (0.064 to 0.254 mm)
Media Width Range
1.00 to 5.15 inches (25.4 to 130.8 mm)
Media Length Range
1.00 to 99 in. (25.4 to 2515 mm)