Printronix SL4M User Manual
56
Chapter
3
Parallel Interface
IEEE 1284
The IEEE 1284 supports three operating modes, which are determined by
negotiation between the printer and the host.
negotiation between the printer and the host.
Compatibility Mode
This mode provides compatibility with Centronics-like host I/O (see Table 4).
Data is transferred from the host to the printer in 8-bit bytes over the data
lines.
Data is transferred from the host to the printer in 8-bit bytes over the data
lines.
Compatibility Mode can be combined with Nibble and Byte Modes to provide
bidirectional communication.
bidirectional communication.
Nibble Mode
Eight bits equals one byte. When a byte of data is sent to the printer, the eight
bits are sent over eight data lines.
bits are sent over eight data lines.
Some devices cannot send data over their eight data lines. To bypass this,
the IEEE 1284 permits data to be sent as half a byte over four status lines.
(Half a byte equals one nibble.) Two sequential four-bit nibbles are sent over
the lines.
the IEEE 1284 permits data to be sent as half a byte over four status lines.
(Half a byte equals one nibble.) Two sequential four-bit nibbles are sent over
the lines.
Data is transferred from printer to host in four-bit nibbles over the status lines,
and the host controls the transmission.
and the host controls the transmission.
Byte Mode
The printer and host send data to each other along eight data lines (one bit
per line).
per line).
If bidirectional communication is supported by the printer and the host, the
host will take control of the data transfer.
host will take control of the data transfer.