Printronix SL4M Reference Manual
47
A
Configuration Setting
Compatibility
The tables below list the Datamax configuration setting along with a
description of its behaviour on Datamax printers, and the corresponding
Printronix menu setting.
description of its behaviour on Datamax printers, and the corresponding
Printronix menu setting.
Table 1. Media Settings menu
Datamax Setting
Description
PTX Setting
MEDIA TYPE
Selects the printing method.
DIRECT THERMAL,
*THERMAL TRANSFER
DIRECT THERMAL,
*THERMAL TRANSFER
SL5000r/T5000r: MEDIA-
CONTROL
CONTROL
→
Print Mode
Direct, *Transfer
SLxx/T5xx: MEDIA-SETUP
SLxx/T5xx: MEDIA-SETUP
→
Print Mode Direct,
*Transfer
SENSOR TYPE
Selects the top-of-form (TOF)
sensingmethod for the media.
*GAP, CONTINUOUS,
REFLECTIVE
sensingmethod for the media.
*GAP, CONTINUOUS,
REFLECTIVE
SL5000r/T5000r:
CALIBRATE CTRL
CALIBRATE CTRL
→
Gap/
Mark Sensor
*Disable, Mark, Gap,
Advanced Gap, Advanced
Notch
SLxx/Txx: SENSOR SETUP
*Disable, Mark, Gap,
Advanced Gap, Advanced
Notch
SLxx/Txx: SENSOR SETUP
→
Gap/Mark Sensor
*Disable, Mark, Gap
LABEL LENGTH
When the Sensor Type is set
to Continuous, this value is
used to determine the TOF.
*04.00in (0-99.99)
to Continuous, this value is
used to determine the TOF.
*04.00in (0-99.99)
SL5000r/T5000r: MEDIA-
CONTROL
CONTROL
→
Label Length
*04.0 or 06.0 (00.1 to 99.0
inches)
SLxx/Txx: MEDIA-SETUP
inches)
SLxx/Txx: MEDIA-SETUP
→
Label Length
*04.0 or 06.0 (00.1 to 99.0
inches)
inches)