Dualit 88600 User Guide
ENSURE THE PROCESSOR IS UNPLUGGED WHILST IN
STORAGE, WITH THE LID UNLOCKED. THOROUGHLY
CLEAN AND DRY YOUR PROCESSOR AND ALL
ATTACHMENTS FOLLOWING THE CLEANING
INSTRUCTIONS ON P 21. CHECK THE CONTROL KNOB
IS IN THE OFF POSITION BEFORE STORING. KEEP THE
TOOLBOX OUT OF REACH OF CHILDREN.
STORAGE, WITH THE LID UNLOCKED. THOROUGHLY
CLEAN AND DRY YOUR PROCESSOR AND ALL
ATTACHMENTS FOLLOWING THE CLEANING
INSTRUCTIONS ON P 21. CHECK THE CONTROL KNOB
IS IN THE OFF POSITION BEFORE STORING. KEEP THE
TOOLBOX OUT OF REACH OF CHILDREN.
•
Dismantle the processor, clean and dry all parts
•
Store the: bowls, drive shaft, small blade and lid with
food pusher assembled on the processor body
food pusher assembled on the processor body
•
Do not lock the bowl lid whilst in storage. This can
damage the safety mechanism built into the bowl
damage the safety mechanism built into the bowl
•
The large and medium blades, spatula and all discs
should be stored in the toolbox provided or in the
same manner you would store sharp knives. The
chipping disc will only fit in the second disc slot as
shown below
should be stored in the toolbox provided or in the
same manner you would store sharp knives. The
chipping disc will only fit in the second disc slot as
shown below
•
Keep out of direct sunlight whist in storage.
What do I do if my processor won’t turn on?
•
Check the plug is correctly fitted in the outlet and
the power supply is switch on
the power supply is switch on
•
Check the power cord is securely attached to the
back of the processor
back of the processor
•
Check the fuse in the plug. Ensure the new fuse
is the same current value as original
is the same current value as original
•
Ensure the bowl and lid are locked in position
•
Check that the small bowl has properly located onto
the medium bowl. If not the lid will not locate
properly and the processor will not turn on.
the medium bowl. If not the lid will not locate
properly and the processor will not turn on.
What if it switches itself off while I’m using it?
•
The motor may have overheated. To prevent
damage, the unit will automatically cut all power. If
this happens: Turn switch to off, unplug and allow
the unit to cool for approximately 1 hour. Once
cool the overheat safety feature will reset and you
can carry on using the processor
damage, the unit will automatically cut all power. If
this happens: Turn switch to off, unplug and allow
the unit to cool for approximately 1 hour. Once
cool the overheat safety feature will reset and you
can carry on using the processor
•
Check the lid or bowl has not become lose.
What if it doesn’t chop uniformly?
•
Blades or discs may not be attached properly
•
You may be exerting too much force on the food
while pushing down the feeder tube.
while pushing down the feeder tube.
What if my egg whites won’t stiffen up?
•
You may not be using enough eggs (we recommend
a minimum of two eggs)
a minimum of two eggs)
•
You may be using the wrong accessory; for egg
whites you need the e-disc and the large bowl
whites you need the e-disc and the large bowl
•
You may not be whisking for long enough
•
Your bowl must be completely dry.
22
Grating &
Shaving discs
Chiping
disc
Adjustable
slicing disc
Medium
Blade
Spatula
Large
Blade
Blade
E-Disc
Dough
Blade
CLEANING AND CARE
STORAGE
TROUBLESHOOTING
2007.07.24_Food processor manual.qxp 25/07/2007 09:12 Page 22