Printronix l7032 Reference Manual
26
Chapter
2
Command Codes
Command Codes
The tables on the following pages list each VGL command according to the
Graphics Mode in which it operates. Following these tables, each command in
this chapter is presented in alphabetical order.
Graphics Mode in which it operates. Following these tables, each command in
this chapter is presented in alphabetical order.
Graphics Mode Enable Commands
To enable the Graphics Mode, you must use the Graphics Mode Enable
command. Table 1 summarizes the Graphics Mode Enable and Disable
commands and the four alphanumeric commands, which are fully described
on the referenced pages. After enabling the Graphics Mode, alphanumeric
command. Table 1 summarizes the Graphics Mode Enable and Disable
commands and the four alphanumeric commands, which are fully described
on the referenced pages. After enabling the Graphics Mode, alphanumeric
commands
, standard graphics commands, or extended graphics commands
are available.
Table 1. Graphics Mode Commands
Command
Description
Page #
IPARAM
Graphics Resolution
PF
Free-Format Enable, Non-Graphics
PO
Free Format Disable, Non-Graphics
F
Free Format (graphics) Enable
O
Free Format (graphics) Disable
PY
Graphics Mode Enable
PN
Graphics Mode Disable
M
Alphanumerics, Standard
V
Alphanumerics, Rotated Clockwise (Top Down)
E
Alphanumerics, Rotated Counterclockwise (Bottom Up)
E
Alphanumerics, Rotated Counterclockwise-Reverse String
U
Alphanumerics, Inverted
U
Alphanumerics, Inverted-Reverse String
in
Character Set Selection (Multinational Character Set)
I
Interrupt
un
User Set Selection (Multinational Character Set)
IPAGE
Page, Controlling Paper Options