DK digital dvd-438 User Guide
10
BASIC OPERATION
Chapter 1 Basic Operation
1.Turn On the TV and Your DVD Player
2.Place A Disc into the tray
3.Play discs
a) Menu Play (compatible with DVD, SVCD, VCD2.0 discs)
I.
II.
III.
IV.
V.
Press the Power button on the player , and "Read" appears on the TV screen. If there
hasn't a disc in the DVD player, "No disc" will be displayed on both the screen and the VFD.
hasn't a disc in the DVD player, "No disc" will be displayed on both the screen and the VFD.
Press the Open / Close button on the remote controller or the front of the DVD player, and
"Open" appears on the screen. Then Place a disc gently into the tray with the disc's label
facing up (double-sided discs have content on both sides, so you can place either side up),
and press the Open / Close button again to close the disc tray, "Close" appears and the
player starts to read. Then the disc starts playing automatically.
"Open" appears on the screen. Then Place a disc gently into the tray with the disc's label
facing up (double-sided discs have content on both sides, so you can place either side up),
and press the Open / Close button again to close the disc tray, "Close" appears and the
player starts to read. Then the disc starts playing automatically.
The contents of each disc menu vary according to how the disc was authored and what
features are included. The disc menu will be turned on for you to select, when Menu button
pressed. Also play and pause can be switched with the Pause button on the remote.
Moreover, such as menu play, title play, sequence play etc., these different play modes
are offered.
pressed. Also play and pause can be switched with the Pause button on the remote.
Moreover, such as menu play, title play, sequence play etc., these different play modes
are offered.
Press Menu Button
TV screen displays the DVD Root Menu when a DVD disc is loaded.
When a SVCD or VCD 2.0 disc is loaded, SVCD or VCD 2.0 menu will be displayed
on the screen (when PBC is off) (At this moment, press PBC button once to display
current PBC state).
PBC is initialized on when a SVCD or VCD2.0 disc is loaded.
When a SVCD or VCD 2.0 disc is loaded, SVCD or VCD 2.0 menu will be displayed
on the screen (when PBC is off) (At this moment, press PBC button once to display
current PBC state).
PBC is initialized on when a SVCD or VCD2.0 disc is loaded.
When a DVD disc is loaded, you can press Arrow buttons to highlight the menu item you
want to choose; As SVCD or VCD2.0, you can press Numeric buttons to select a track
to play.
to play.
Press Enter or Play button, you can begin play with the highlighted.
Return when playing: When a DVD disc is playing, press Menu (PBC) button, and you
can return to Root Menu; As SVCD, VCD2.0, and PBC is on, press Menu (PBC) button,
you can return to the menu.
you can return to the menu.
Stop
1) When you press Stop button for the first time, the player turns into pre-stop state. At
the same time the OSD appears "Pre Stop". To begin the title over, press Stop twice.
2) In pre-stop state, the player remembers where you stopped, when you start playing
the disc again, the DVD player picked up where you left off.
3) In stop state, when you press Play, the player enters sequence playback mode.
For the disc protection, before you press Open / Close button to eject the disc tray
when playing, please press Stop button at first. After taking out the disc, press
OPEN/CLOSE again to close the tray.
If you're not going to use the DVD player for a long time, be sure to remove the
electronic plug.
when playing, please press Stop button at first. After taking out the disc, press
OPEN/CLOSE again to close the tray.
If you're not going to use the DVD player for a long time, be sure to remove the
electronic plug.
(Note: Of some certain
type discs, after reading out the type, the Play or Enter button should be pressed to start
playing.)
playing.)