Toshiba U100 User Manual

49

5.375 x 8.375 ver 2.3

may want to increase the computer’s memory if you use 
complex software or process large amounts of data. 

An additional memory module can be installed in the 
memory module slot on the base of the computer. You will 
need a standard Phillips No. 1 screwdriver for this procedure.

To avoid damaging the computer’s screws, use a standard 
Phillips No. 1 screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

The computer has one memory module slot. You can install 
one memory module.

Before you install or remove a memory module, turn off the 
computer using the Start menu. If you install or remove a 
memory module while the computer is in Standby or 
hibernation mode, data will be lost.

If the computer is on, begin at step 

; otherwise, skip to step 

. 

If the computer is on, click Start, Turn off computer.

The Turn off computer window appears.

Click Turn Off.

The operating system turns off the computer. 

Unplug and remove any cables connected to the 
computer, including the AC adapter cord/cable.