Toshiba M100 User Guide
142
Expansion Options
Using an SD card
5.375 x 8.375 ver 2.4.0
music players, cellular phones, PDAs, digital cameras, digital
video camcorders, etc.
video camcorders, etc.
Do not touch the SD connector. You could expose the storage
area to static electricity which can destroy data.
area to static electricity which can destroy data.
Do not remove an SD card while data is being written or read.
Even when the message “copying...” in the windows
disappears, the computer may be writing to the computer and
your data could be destroyed. Wait for the SD indicator light to
go out.
Even when the message “copying...” in the windows
disappears, the computer may be writing to the computer and
your data could be destroyed. Wait for the SD indicator light to
go out.
Installing SD card drivers
During installation of the SD card drivers, one or more dialog
boxes may appear indicating that the driver is not digitally
signed. The message may appear as “Digital Signature not
found (About Secure Digital Emulation from Toshiba).”
Click Yes to continue.
boxes may appear indicating that the driver is not digitally
signed. The message may appear as “Digital Signature not
found (About Secure Digital Emulation from Toshiba).”
Click Yes to continue.
Installing the SD card in the SD slot
To insert an SD card, turn the card so that the connector
(metal area) faces down then push the card in the slot until it
locks in place.
(metal area) faces down then push the card in the slot until it
locks in place.
If the operating system does not recognize an inserted SD
card, remove and insert it again.
card, remove and insert it again.
The green LED on the left side of the SD card slot will glow
when the card is being accessed.
when the card is being accessed.
If the SD card is not inserted into the slot correctly, any data
saved to the card may be lost.
saved to the card may be lost.