Toshiba M200 User Manual

206

5.375 x 8.375 ver 2.3

Here are some typical display problems and their solutions:

Display Auto Off may have gone into effect. Press any key to 
activate the screen.

You may have activated the instant password feature by 
pressing 

Fn

and

F1 

simultaneously. If you have registered a 

password, press any key, type the password and press 

Enter

. If 

no password is registered, press any key. The screen 
reactivates and allows you to continue working.

If you are using the built-in screen, make sure the display 
priority is not set for an external monitor. To do this, press 

Fn

 

and 

F5

 simultaneously (once). If this does not correct the 

problem, press 

Fn

 and 

F5 

simultaneously again to return the 

display priority to its previous setting.

HINT: Holding the Fn key and pressing the F5 key several 
times will advance you through the display options.

If you are using an external monitor:

❖

Check that the monitor is turned on.

❖

Check that the monitor’s power cord/cable is firmly 
plugged into a working power outlet.

❖

Check that the cable connecting the external monitor to 
the computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the 
external monitor.

❖

Press 

Fn

 and 

F5

 simultaneously to make sure the display 

priority is not set for the built-in screen.