Toshiba M200 User Manual

Page of 290
129
Expansion Options
Using external display devices
5.375 x 8.375 ver 2.3
3
Release the 
Fn
 key.
TECHNICAL NOTE: You can also change these settings using 
the Display Properties Box.
Using the Cross-Functional button
The Cross-Functional button, located on the front of the 
display (the left-most button at bottom right), can be used to 
select the external display device. Press and hold the Cross-
Functional button for two seconds until the external display screen 
displays. For more information, see 
Adjusting the quality of the external display
To obtain the best picture quality from your external display 
device, you may need to adjust the video settings. See the 
documentation supplied with the device for additional 
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode, 
you must set the resolution of the internal display panel to 
match the resolution of the external display device. The 
external display device must support a resolution of 800 X 600 
or higher.
If you have your internal display set to horizontal landscape 
and then rotate the internal display to a portrait style, images 
will not display properly on an external display or other exter-
nal device (for example, a projector) unless you change the 
internal device’s setting to primary landscape. This is a techni-
cal restriction.
When the display is rotated, the display orientation on the 
external display will also rotate.