Toshiba M200 User Manual

Page of 290
140
Expansion Options
Using an optional SD™ card
5.375 x 8.375 ver 2.3
system may not shut down properly. If this occurs, reset your 
computer by sliding the power button to the right and holding 
it for four seconds.
Removing an optional SD™ card
Before removing an SD card from the SD slot, close any 
applications which utilize the SD card. Use the eject utility to 
ensure that the card is ready to be removed. Once the activity 
indicator light has turned off, you may safely remove the 
card.
To remove an SD card, press the card inward to release it. The 
card pops out slightly. The device name will disappear only 
after you have physically removed the card from your 
computer. 
Removing the SD card without using the eject utility may result 
in lost data on your SD card.