Toshiba M200 User Manual

17

5.375 x 8.375 ver 2.3

❖

To remain in conformance with European spectrum usage laws for Wireless 
LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.   
The user should use the wireless LAN utility to check the current channel of 
operation. If operation is occurring outside of the allowable frequencies as 
listed above, the user must cease operating the Wireless LAN at that 
location and consult the local technical support staff responsible for the 
wireless network.

❖

The 5 GHz Turbo mode feature is not allowed for operation in any 
European Community country.

❖

This device must not be operated in ad-hoc mode using channels in the 
5 GHz bands in the European Community.   Ad-hoc mode provides a direct 
communication between two client devices without a Wireless LAN Access 
Point.

❖

This device must be used with Access Points that have employed and 
activated a radar detection feature required for European Community 
operation in the 5 GHz bands. This device will operate under the control of 
the Access Point in order to avoid operating on a channel occupied by any 
radar system in the area. The presence of nearby radar operation may result 
in temporary interruption of operation of this device. The Access Point’s 
radar detection feature will automatically restart operation on a channel free 
of radar. You may consult with the local technical support staff responsible 
for the wireless network to ensure the Access Point device(s) are properly 
configured for European Community operation. 

This equipment is approved to the radio standard by the countries/regions in the 
following table.

Do not use this equipment except in the countries/regions in the following 
table.

This device works on passive scan only. 

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

NOTE