Toshiba M750 User Guide

217

❖

The setting of “USB Sleep and Charge function” may be 
Disabled. Change the setting to Enabled.

❖

Some external devices may not be able to use the “USB Sleep 
and Charge function”. In this case, please try one or more of 
the following methods.

❖

Change the Enabled mode setting.

❖

Turn OFF the computer while external devices are 
connected.

❖

Connect external devices after turning OFF the computer. 

If this function cannot be used, change the setting to Disabled.

❖

Make sure that you are connected to a compatible port.

❖

When the “USB Sleep and Charge function” is set to Enabled, 
the “USB Wakeup function” does not work for ports that 
support the “USB Sleep and Charge function.” In that case, use 
a USB port that does not have the “USB Sleep and Charge 
function”-compatible icon (

), if you have a non-Sleep and 

Charge USB port available or disable the “USB Sleep and 
Charge function.” For more information, see 

.

A connected eSATA device may not be recognized if it is connected 
to the computer’s eSATA/USB combo port while the computer is in 
Sleep or Hibernation mode. If this occurs, disconnect the eSATA 
device and then reconnect the device while the computer is turned 
on.

Before connecting the eSATA device to your computer and external 
power source, read the documentation that came with the device and 
follow the manufacturer’s instructions.

NOTE