Toshiba R200 User Guide

181

5.375 x 8.375 ver 2.3.2

Follow the instructions on the screen.

Once the TPM files have been installed, you will need to 
enable the TPM feature through your system’s BIOS. 

To enable TPM:

Restart your system and hold down the Esc key.

Press F1 when directed.

Press the pg dn key.

Press the down arrow key until TPM is highlighted and 
then press the space bar to change the status of TPM to 
Enabled.

Press Y to save the changes. 

Press the End key and then press the Y key to accept the 
changes.

Your system will restart.

For further information on how to set up and use this utility, 
please see the Infineon TPM (Trusted Platform Module) 
Installation Guide.

Your computer comes with a System Setup utility that lets 
you set two types of hard disk drive passwords—user and 
master. These passwords protect your primary and secondary 
hard disks as follows:

❖

Setting a hard disk drive user password prevents an 
unauthorized user from accessing your hard disk, even if 
it is removed and installed on another computer. This 
password does not encrypt data on the hard disk.

❖

Setting a hard disk drive master password lets you bypass 
the hard disk drive user password and access your hard 
disk, in case you forget the hard disk drive user password. 
If you choose to set a hard disk drive master password,