Toshiba f10-120 User Guide

Page of 214
User’s Manual
6-4
Power
Power indicator
Check the Power indicator to determine the power status:
Battery types
The computer has two types of batteries:
Battery pack 
Real Time Clock (RTC) battery
Battery pack
When the AC adaptor is not connected, the computer's main power source 
is a removable lithium ion battery pack, also referred to in this manual as 
the battery. You can purchase additional battery packs for extended use of 
the computer away from an AC power source.
Before you remove the battery pack, set the computer to Hibernation mode 
or save your data and shut down the computer. Do not change the battery 
pack while the AC adaptor is connected.
To ensure that the battery pack maintains its maximum capacity, operate 
the computer on battery power at least once a month until the battery pack 
is fully discharged. Refer to 
 in this chapter for 
procedures. If the computer is continuously operated on AC power through 
an AC adaptor for an extended period, more than a month, the battery may 
fail to retain a charge. It may not function efficiently over the expected life of 
the battery and the Battery indicator may not indicate a low-battery 
condition.
Green
Indicates power is being supplied to the computer 
and the computer is turned on.
Blinking orange
Indicates power is being supplied to the computer 
while the computer is in Standby mode. The 
indicator turns on for one second and off for 
two seconds.
No light
Under any other conditions, the indicator does not 
light.
The battery pack is a lithium ion battery, which can explode if not 
properly replaced, used, handled or disposed of. Dispose of the battery 
as required by local ordinances or regulations. Use only batteries 
recommended by TOSHIBA as replacements.
Do not remove the battery pack while the computer is in Standby mode. 
Data is stored in RAM, so if the computer loses power it will be lost. 
When the computer is powered off in Standby mode, and the AC 
adaptor is not connected, the battery pack supply power to maintain 
data and program in memory. If the battery pack is completely 
discharged, Standby mode does not function and the computer loses 
all data in memory.