Toshiba f10-120 User Guide
User’s Manual
9-12
Optional Devices
3. Turn the computer upside down and remove the battery pack. Refer to
4. Loose a screw securing the memory module cover. The screw is
attached to the cover to prevent it from being lost.
5. Slide your fingernail or a thin object under the cover and lift it off.
6. Push the latches to the outside to release the module. A spring will
force one end of the module up.
7. Grasp the module by the sides and pull it out.
Removing the memory module
8. Seat the memory module cover and secure it with one screw.
section in
Chapter 6, Power, for details.
10. Return your computer to the upright position.
Battery packs
You can increase the portability of the computer with additional standard or
high-capacity battery packs. If you’re away from an AC power source and
your battery runs low, you can replace it with a freshly charged battery.
Refer to Chapter 6,
high-capacity battery packs. If you’re away from an AC power source and
your battery runs low, you can replace it with a freshly charged battery.
Refer to Chapter 6,
.
■
If you use the computer for a long time, the memory modules and the
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them.
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
computer. Debris on the connectors may cause memory access
problems.
Latches
Slot B
Slot A