Toshiba 2805-s503 User Guide
50
Getting Started
Setting up your computer
Setting up your computer
Removing a memory module
1
2
Gently pull up on the module to disconnect it, then gently pull
it out of the slot.
it out of the slot.
3
Complete the procedure by following steps 9 through 11.
Connecting a mouse
You may want to use a mouse instead of the computer’s built-in
pointing device. A USB (plug and play) mouse disables the
AccuPoint II pointing device. With a PS/2 mouse, you can choose
to have the AccuPoint II pointing device active at the same time.
pointing device. A USB (plug and play) mouse disables the
AccuPoint II pointing device. With a PS/2 mouse, you can choose
to have the AccuPoint II pointing device active at the same time.
Connecting a USB mouse
To connect a USB mouse, plug the mouse cable into one of the
USB ports.
USB ports.
Connecting a PS/2 mouse
CAUTION: Make sure the computer is off before you attach a
PS/2 mouse. Connecting a PS/2 mouse with the computer’s
power on may damage the mouse, the computer, or both.
PS/2 mouse. Connecting a PS/2 mouse with the computer’s
power on may damage the mouse, the computer, or both.
To connect a PS/2 mouse, plug the mouse cable into the PS/2 port.
By default, the system configures the PS/2 mouse to work when it
is connected at power on, or the AccuPoint II pointing device to
work otherwise.
is connected at power on, or the AccuPoint II pointing device to
work otherwise.
To use both the PS/2 mouse and the AccuPoint II pointing device
simultaneously, see
simultaneously, see