Toshiba 2805-s503 User Guide
62
Getting Started
Using the computer for the first time
Using the computer for the first time
10
Click Next.
The operating system prompts you to print a test page.
11
If your printer is connected and turned on, click Finish to
print a test page.
print a test page.
To complete the setup procedure without printing a test page,
click No, then click Finish.
click No, then click Finish.
You are now ready to print.
12
If you requested a test page, click OK to print.
Depending on your program, you may see various messages
indicating the status of your print job.
indicating the status of your print job.
Using a PS/2 mouse with the AccuPoint II
To set up a PS/2 mouse to work simultaneously with the
AccuPoint II pointing device:
AccuPoint II pointing device:
1
Click Start, point to Settings, then click Control Panel.
2
Double-click Toshiba HWSetup, then select the Pointing
Devices tab.
Devices tab.
3
Under Pointing Devices, select Simultaneous.
This option configures both the AccuPoint II pointing device
and the PS/2 mouse to work at the same time. You must
restart the computer for the setting to take effect.
and the PS/2 mouse to work at the same time. You must
restart the computer for the setting to take effect.
TECHNICAL NOTE: The system cannot detect a PS/2 mouse
if you connect it after you start the computer.
if you connect it after you start the computer.
4
Click OK, then click Yes to restart the computer.