Toshiba M100 User Guide

54

5.375 x 8.375 ver 2.3

For more information on memory options, check the 
accessories information that came with your computer, or 
visit

Before adding external devices or memory, Toshiba 
recommends setting up your software. See 

The computer has two memory module slots. An additional 
memory module can be installed in the memory module slot 
on the base of the computer. You will need a standard Phillips 
No. 1 screwdriver for this procedure.

If you use the computer for a long time, the memory module 
will become hot. If this happens, let the module cool to room 
temperature before you replace it.

To avoid damaging the computer’s screws, use a standard 
Phillips No. 1 screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

Before you install or remove a memory module, turn off the 
computer using the Start menu. If you install or remove a 
memory module while the computer is in Standby or 
Hibernation mode, data will be lost.

NOTE