Toshiba m640-bt2n25 Reference Guide

23

5.375 x 8.375 ver 3.1

❖

Slot-type drive: With the label facing up, carefully place 
the disc partially into the slot until the disc stops or the 
drive starts pulling the disc in.

Use only standard (12 cm) CD or DVD Discs. Any other size or shape 
disc cannot be removed from this slot and may damage the system.

If your optical disc drive has a manual eject button, you can remove a 
disc while the computer is off if necessary (for example, if you 
cannot turn on the computer because the battery is completely 
discharged). See “Using the manual eject button” on page 24. 
Otherwise, the computer must be powered on to eject a disc (follow 
the procedure below).

To remove an optical disc with the computer turned on:

Press the eject button on the drive.

Do not press the eject button while the drive in-use indicator light is 
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray (on a 
tray-type drive), wait for it to stop spinning before you remove it.

Remove the disc from the drive, as indicated below for your 
drive type:

❖

Tray-type drives: Pull the tray out fully, remove the disc, 
and then gently press the tray in to close it.

❖

Slot-type drives: Grasp the disc and remove it from the 
slot.

Place the disc in its protective cover.