Toshiba p100-st1071 User Guide
67
Getting Started
Using external display devices
Configuring virtual buttons
The virtual buttons at the top of the Dual Mode Pad are pre-
configured for the Email, ConfigFree, and Print functions. You can
assign different functions to these buttons if you wish.
configured for the Email, ConfigFree, and Print functions. You can
assign different functions to these buttons if you wish.
The virtual buttons on the bottom of the Dual Mode Pad (buttons 4,
5, and 6 in the Properties for Synaptics LuxPad window) are
unassigned by default. In order to use one of these buttons, you
must first configure that button so that it is associated with a
function.
5, and 6 in the Properties for Synaptics LuxPad window) are
unassigned by default. In order to use one of these buttons, you
must first configure that button so that it is associated with a
function.
To configure a virtual button:
1
Perform steps 1-5 in
.
2
Select the virtual button you wish to configure.
3
Select the desired options, and then click OK.
4
Click OK.
5
Click OK to close the Mouse Properties window.
Using external display devices
Your computer comes with a built-in display, but you can also
connect an external display device to an available video port, as
follows:
connect an external display device to an available video port, as
follows:
❖
An external monitor or projector via the RGB (monitor) port
❖
A TV, VCR, or DVD recorder via the S-video (TV-out) port
❖
A projector or a monitor via the DVI video port (available on
certain models)
certain models)
DVI stands for Digital Visual Interface, and is a standard for
connecting computers to digital monitors.
connecting computers to digital monitors.
Before connecting an external monitor or video projector, configure
your computer for the type of device you are connecting. To do this,
refer to the documentation for your operating system and devices.
your computer for the type of device you are connecting. To do this,
refer to the documentation for your operating system and devices.
Coaxial cable connection to this computer must only be used if the
cable’s outer conductive shielding has been grounded by the cable
installer at the building premises as close to the point of cable
entrance, or attachment, as practicable and the connection complies
with all local cable installation requirements that are applicable in
your area.
cable’s outer conductive shielding has been grounded by the cable
installer at the building premises as close to the point of cable
entrance, or attachment, as practicable and the connection complies
with all local cable installation requirements that are applicable in
your area.
NOTE
NOTE