Toshiba P205D-S7454 User Manual
51
Getting Started
Adding memory (optional)
If you are adding extra memory after setting up the computer, verify
that the computer has recognized it correctly as described in
that the computer has recognized it correctly as described in
.
Removing a memory module
If you need to remove a memory module:
1
in
to shut down the computer and open the memory
module slot cover.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
The following screen may appear when you turn on the power:
If “Start Windows
®
Normally” is highlighted, then press
Enter
.
If one of the Safe Mode options is highlighted, it is best to press
Enter
to go into Safe Mode, then shut down and restart the system, at
which time Windows
®
should boot back up normally.
When Safe Mode is suggested, this could be a sign that you may
need to scan your hard drive for errors or defragment the drive. If so,
consult Windows
need to scan your hard drive for errors or defragment the drive. If so,
consult Windows
®
Help and Support.
2
Pull the latches away from the memory module.
The memory module pops up slightly.
NOTE