Toshiba p205d-s8806 User Guide

Satellite P200/Satellite Pro P200

9-9

Troubleshooting

If the following procedures do not restore LAN access, consult your LAN 
administrator. For more information on wireless communication, refer to 
Chapter 4, Operating Basics.

Refer also to Chapter 8, Optional Devices, and to your monitor’s 
documentation.

Cannot access Wireless 
LAN

Make sure the computer's wireless 
communication switch is set to on.
Use the ConfigFree program that comes pre-
installed in your computer to see LAN status.
If problems persist, consult your LAN 
administrator.

Monitor does not turn on Make  sure  that the external monitor's power 

switch is on. Confirm that the external monitor's 
power cable is plugged into a working power 
outlet.

No  display

Try adjusting the contrast and brightness controls 
on the external monitor.
Press hotkeys Fn + F5 to change the display 
priority and make sure it is not set for the internal 
display.

Display error occurs

Check that the cable connecting the external 
monitor to the computer is attached firmly.
If problems persist, contact your dealer.

Monitor goes into 
panning mode

Check your monitor specification. It might not 
support the selected resolution and refresh rate. 
The resolution on the monitor might go into 
panning mode when wide screen resolution is 
selected. Refer to Appendix B, Display Modes.