Toshiba p205d-s8806 User Guide

Satellite P200/Satellite Pro P200

9-13

Troubleshooting

Refer also to Chapter 8, Optional Devices, for information on installing 
memory modules.

The computer hangs up 
and issues beep 
sounds. (A long beep, 
three short beeps, three 
short beeps, and then a 
long beep.)

Make sure the memory module installed in the 
expansion slot is compatible with the computer.
If an incompatible module has been installed, 
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adapter and all peripheral 

devices.

3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the 

AC adapter.

6. Turn on the power.
If problems persist, contact your dealer.

Communication 
software can't initialize 
the modem

Make sure the computer's internal modem 
settings are correct. Refer to Phone and Modem 
Options Properties in the Control Panel.

You can hear a dial tone 
but can't make a call

If the call is going through a PBX machine, make 
sure the communication application's tone dial 
detection feature is disabled.

You place a call, but a 
connection can't be 
made

Make sure the settings are correct in your 
communications application.

After making a call you 
can't hear a ring

Make sure the tone or pulse selection in your 
communications application is set correctly.

Communication is cut 
off unexpectedly

The computer will automatically cut off 
communication when connection with the carrier 
is not successful for a set time interval. Try 
lengthening this time interval.

A CONNECT display is 
quickly replaced by NO 
CARRIER

Check the error control setting in your 
communications application.