Toshiba 8100 User Guide
Part I: Getting to Know Your Computer
Connecting Other External Devices
Adding memory
Adding memory
42
Your computer is equipped with a 100 MHz Front Side Bus (FSB)
SDRAM memory module. In addition, there are two memory
expansion slots in this computer to provide various memory
configurations. When additional memory is added, or original
memory replaced, it is recommended that you use only compatible
100 MHz memory. In the event original memory is replaced with
invalid memory, such as 66 MHz, the system will beep and will
not boot beyond the BIOS memory check. A message may
display. If this occurs, contact Toshiba’s support center at
(800) 457-7777.
SDRAM memory module. In addition, there are two memory
expansion slots in this computer to provide various memory
configurations. When additional memory is added, or original
memory replaced, it is recommended that you use only compatible
100 MHz memory. In the event original memory is replaced with
invalid memory, such as 66 MHz, the system will beep and will
not boot beyond the BIOS memory check. A message may
display. If this occurs, contact Toshiba’s support center at
(800) 457-7777.
Since your Tecra 8100 computer was built to order, it should have
enough memory to run your current applications. However, if your
requirements change, you can install extra memory up to a
maximum of 256 MB.
enough memory to run your current applications. However, if your
requirements change, you can install extra memory up to a
maximum of 256 MB.
Memory module sizes
Additional memory is easy to install. Memory modules come in
the following sizes:
the following sizes:
❖
64 MB PC100 SDRAM
❖
128 MB PC100 SDRAM
The computer has two memory expansion slots. The following
table shows the possible memory configurations:
table shows the possible memory configurations:
Total Memory
Memory Module Size
(slot A)
(slot A)
Memory Module Size
(slot B)
(slot B)
64 MB
64 MB
none
128 MB
128 MB
none
64 MB
64 MB
192 MB
128 MB
64 MB
64 MB
128 MB