Manualsbrain.com
  1. Manuals
  2. Brands
  3. Toshiba
  4. 9100
  5. User Guide

Toshiba 9100 User Guide

Download
Page of 265
64
Connecting Other External Devices
Adding memory
Adding memory
HINT: To purchase additional memory modules, see the 
accessories information packaged with your system or visit 
www.toshibaaccessories.com
.
Your Tecra
®
 9100 Series computer is equipped with two memory 
slots which can provide for various memory configurations. When 
additional memory is added, or original memory replaced, it is 
recommended that you use only compatible memory. In the event 
original memory is replaced with invalid memory, the system will 
beep and will not boot beyond the BIOS memory check. A 
message may display. If this occurs, contact Toshiba’s support 
center at (800) 457-7777. 
Since your computer was built to order, it should have enough 
memory to run your current applications. However, if your 
requirements change, you can install extra memory.
Installing a memory module
Additional memory modules can be installed in the memory 
expansion slots on the base of the computer. You will need a 
standard Phillips no.1 screwdriver for this procedure.
CAUTION: To avoid damaging the computer’s screws, use a 
standard Phillips no. 1 screwdriver that is in good condition. 
The computer has two memory expansion slots—Slot A and 
Slot B. You can install one or two memory modules.
1
Shut down your computer completely using the Shut Down 
command. See 
.