Toshiba m3 User Guide
202
Keeping Your Files Safe
Hard disk drive passwords
5.375 x 8.375 ver 2.3
7
When System Setup prompts you to verify the password,
type it again and press
type it again and press
Enter
.
If the two passwords match, System Setup displays:
Registered
. If the two passwords do not match, an error
password again.
8
Press
End
to save the change.
9
When System Setup prompts you to confirm your
change, press
change, press
Y
.
Deleting or changing a hard disk drive user only password in
System Setup
System Setup
To delete or change a user only password in System Setup:
1
Click Start, Shutdown, and then OK.
The computer shuts down.
2
Hold down the
Esc
key and press and hold the power
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: “Check
system, Then press [F1] key,” press
illuminates (green) for approximately one second. When
the following message appears on the screen: “Check
system, Then press [F1] key,” press
F1
.
The System Setup screen appears.
3
Press
H
to move to the HDD PASSWORD section on the
screen.
4
Press the spacebar, then type in your user password and
press
press
Enter
.
5
If you want to change the password, input the new
password. If you want to delete the password, proceed to
password. If you want to delete the password, proceed to
.
6
When System Setup prompts you to verify the password,
type it again and press
type it again and press
Enter
.