Toshiba m3 User Guide
64
Connecting Other External Devices
Using external display devices
5.375 x 8.375 ver 2.3
❖
TV (or other external video device) only
3
Release the
Fn
key.
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
the Display Properties Box.
Set the option for the video controller by clicking Start, Control
Panel and then Display. Choose the Settings tab, click the
Advanced button, select Display Device, select the applicable
Monitor type, click Apply or OK.
Panel and then Display. Choose the Settings tab, click the
Advanced button, select Display Device, select the applicable
Monitor type, click Apply or OK.
For more information on switching the display output, see
.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or
other video display device), you may need to adjust the video
settings. See the video device documentation for additional
configuration steps.
other video display device), you may need to adjust the video
settings. See the video device documentation for additional
configuration steps.
TECHNICAL NOTE: To use one of the simultaneous modes,
you must set the resolution of the internal display panel to
match the resolution of the external display device.The
external display device must support a resolution of 800 x 600
or higher.
you must set the resolution of the internal display panel to
match the resolution of the external display device.The
external display device must support a resolution of 800 x 600
or higher.