Toshiba m4-103 User Guide

Optional Devices

Parallel printer

You can connect any standard Centronics-compatible parallel printer to 

your computer. All you need is an IBM PC™ parallel printer cable. Your 

dealer can supply one or you can purchase one at most computer stores.
The cable’s connectors are designed so that it is impossible for you to 

connect them incorrectly. To connect a printer, follow these steps:
1. Turn off the computer’s power.
2. Connect the cable into the Advanced Port Replicator III’s parallel port.
3. Tighten the screws that fasten the connector to the Advanced Port 

Replicator III’s parallel port.

4. Connect the other connecter of the cable into the printer’s parallel 

connector.

5. Fasten the connector to the printer with the clips on the parallel port.
6. Turn on the printer’s power.
7. Turn on the computer’s power.
8. Start the HW Setup program. Refer to Chapter 7, 

.

9. Select the Parallel/Printer tab from the TOSHIBA HW Setup 

window. 

10.  Set the Parallel Port Mode and press OK.
11.  Choose Reboot for the change to take effect.
12.  Select the printer in Windows Add Print Wizard. To access the Add 

 utility, click start, click Control Panel, click Printers 

and Other Hardware and select the Add Printer.