Toshiba m4-103 User Guide

Troubleshooting

Memory expansion

Refer also to Chapter 8, 

, for information on installing 

memory modules.

Sound System

Refer also to documentation for your audio devices.

Beep sounds.
(Two beeps, a dash 

and a dot, for a 

defective memory 

module in slot A. 
Three beeps, a dash 

and two dots for slot B.
When both beeps 

sound, both memories 

in slot A and B are 

defective.)

Make sure the memory module installed in the 

memory slot is compatible with the computer.
If an incompatible module has been installed, 

follow the steps below.
1. Turn off the computer.
2. Disconnect the AC adaptor and all peripheral 

devices.

3. Remove the battery pack.
4. Remove the memory module.
5. Install the battery and/or connect the AC 

adaptor.

6. Turn on the power.
If problems persist, contact your dealer.

No sound is heard

Adjust the volume control dial.

Check the software volume settings.

Make sure the headphone connection is secure. 

If problems persist, contact your dealer.

Check Windows Device Manager. Make sure the 

sound function is enabled and that settings for I/

O address, Interrupt level and DMA are correct 

for your software and do not conflict with other 

hardware devices that you may have connected 

to the computer.

Annoying sound
is heard

You may be experiencing feedback. Refer to 

 in Chapter 4, Operating 

Basics.
If problems persist, contact your dealer.