Toshiba m4-103 User Guide

Getting Started

To enter Hibernation mode, follow the steps below.
1. Click start.
2. Select Turn Off Computer.
3. Open the Turn Off Computer dialog box. Hibernate is not displayed.
4. Press the Shift key. The Standby item will change to Hibernate.
5. Select the Hibernate.

The computer will enter Hibernate mode automatically when you press the 

power button or close the lid. First, however, make the appropriate settings 

according to the steps below.
1. Click start and open the Control Panel.
2. Open Performance and Maintenance and open Power Options.
3. Select the Hibernate tab in the Power Options Properties, select 

the Enable hibernation check box and click the Apply button.

4. Open TOSHIBA Power Saver.
5. Select the Advanced tab.
6. Enable the desired Hibernation settings for When I slide the power 

button and When I close the lid.

7. Click the OK button.

When you turn off the power in hibernation mode, the computer takes a 

moment to save current memory data to the hard disk. During this time, the 

HDD indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn 

off the power to any peripheral devices.

Standby mode

If you have to interrupt your work, you can turn off the power without exiting 

from your software. Data is maintained in the computer’s main memory. 

When you turn on the power again, you can continue working right where 

you left off. 

You can also enable Hibernation by pressing Fn + F4. Refer to Chapter 5,