Toshiba TE2300 User Guide
66
Connecting Other External Devices
Installing a memory module
Additional memory modules can be installed in the memory
expansion slots on the base of the computer. You will need a
standard Phillips no. 1 screwdriver for this procedure.
expansion slots on the base of the computer. You will need a
standard Phillips no. 1 screwdriver for this procedure.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
To avoid damaging the computer’s screws, use a standard
Phillips no. 1 screwdriver that is in good condition.
Phillips no. 1 screwdriver that is in good condition.
The computer has two memory expansion slots — Slot A and
Slot B. You can install one or two memory modules.
Slot B. You can install one or two memory modules.
1
Shut down your computer completely using the Shut Down
command. See
command. See
.
2
Unplug the computer.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
damage the computer, the module, or both.
3
Close the display panel and remove any cables you may
have connected.
have connected.
4
Turn the computer upside down.
5
Locate and remove the screws that hold the cover plate in
place, and lift the cover off of the memory module bay.
place, and lift the cover off of the memory module bay.