Netgear FM114P Reference Guide
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
6-2
Wireless
Wireless Settings
To configure the Wireless interface of your firewall, click on the Wireless heading in the Main
Menu of the browser interface. The Wireless Settings menu will appear, as shown in
Menu of the browser interface. The Wireless Settings menu will appear, as shown in
:
Figure 6-1.
Wireless Settings menu
Identification
In the Identification section are the following parameters:
•
Regulatory Domain
This field displays the region of operation for which the wireless interface is intended. It may
not be legal to operate the firewall in a region other than the region shown here.
This field displays the region of operation for which the wireless interface is intended. It may
not be legal to operate the firewall in a region other than the region shown here.
•
Station Name
This is the Account Name that was defined in the Basic Settings menu. Some Wireless status
screens may display this name as the Access Point in use.
This is the Account Name that was defined in the Basic Settings menu. Some Wireless status
screens may display this name as the Access Point in use.
•
SSID (Service Set ID)
Enter a value of up to 32 alphanumeric characters. The same SSID must be assigned to all
wireless devices in your network. The default SSID is Wireless, but NETGEAR strongly
recommends that you change your network’s SSID to a different value.
Enter a value of up to 32 alphanumeric characters. The same SSID must be assigned to all
wireless devices in your network. The default SSID is Wireless, but NETGEAR strongly
recommends that you change your network’s SSID to a different value.